Second Connector Needed for Tractor-Trailer Communications?

Second Connector Needed for Tractor-Trailer Communications?

<img width="150" src="http://www.automotive-fleet.com/fc_images/blogs/m-img-20170322-152202549-1.jpg" border="0" alt="

Second electrical cable (lower right) on this beverage trailer carries power to charge its liftgate batteries. It coud also carry signals to a high-performance braking system. 

“>

Second electrical cable (lower right) on this beverage trailer carries power to charge its liftgate batteries. It coud also carry signals to a high-performance braking system. 

“>

Increasing need for electronic communications between tractors and trailers could require the use of a second electrical line, says brake-performance specialists. The second wire would carry signals that ensure optimum timing and balance among the brakes and shorten stopping distances in the future.

That’s the view of Fred Andersky, of Bendix Commercial Vehicle Systems, and Keith McComsey, of Dana Spicer Foundation Brake, who briefed reporters on Wednesday, the eve of the opening of the Mid-America Trucking Show in Louisville, Ky.,

They were discussing the superior stopping power of air disc brakes and how the slow but steady adoption of ADBs among North American fleets would enable greater highway safety through shorter stopping distances. A federal mandate for stability control systems on certain heavy vehicles this August adds to the communications burden.

Stopping distances could be even shorter and stability better with more precise signaling between tractors and trailers, Andersky, said. But the current seven-way power cord is about tapped out in capability, and the second cord could increase signaling capacity.

Alternatives are greater use of power line carrier technology, where multiplexing allows the current cable’s seventh circuit to carry electrical power and signaling over the same piece of wire, or a wireless local area network, or LAN.

“It’s got to happen if a trailer is to become an integrated part of a combination vehicle,” which federal safety authorities are talking about, he said. “But retrofitting the extra cable on existing trailers could be a problem.”

Using a LAN would be easier; communications boxes could be installed on each vehicle, then talk to each other wirelessly. But wireless signals are subject to interference and hacking, “and you don’t want someone …Read the rest of this story

Source:: http://www.truckinginfo.com/blog/trailer-talk/story/2017/03/2nd-connector-needed-for-tractor-trailer-communications.aspx