Peterbilt targets 15% market share

App Lets Users Test Suspension from a Phone

Gabriel Ride Control has announced the Suspension Test app for iOS and Android, allowing users to check a vehicles suspension from a smartphone.

Users can add their vehicle by selecting the year, make, model, and style from a dropdown menu and add information on the estimated shock/strut mileage and an identifying name for the vehicle. They can then pick which of the four corners to test – front or rear, left or right.

Simple instructions guide users in how to conduct the test by placing the phone over the corners and bouncing the corner once. The actual testing begins with the push of a start button. Results are provided immediately allowing users to check other corners.

The test results include information and scores for performance and mileage, along with an overall score. After testing, app users can find which parts they need and where to find them and can share the results over email.

Follow @HDTrucking on Twitter

...Read the rest of this story

The Tales Trailer Tires Tell

<img width="150" src="http://www.automotive-fleet.com/fc_images/articles/m-x-one-1.jpg" border="0" alt="

Once trailer tire wear begins, only corrective maintenance action will alleviate the problem. Photo: Michelin

">

Once trailer tire wear begins, only corrective maintenance action will alleviate the problem. Photo: Michelin

">

Say what you will about a tire, but it won't lie to you. If there are problems with wheel alignment, suspensions, braking or chassis, your tires will be happy to tell you, if you just take a look. They'll tell you if they're being run under- or over-inflated. Just read the wear patterns to find out what's going on — and correct problems before they lead to shorter tire life and higher maintenance costs.

Irregular wear is a special problem on free-rolling axles like trailers and tag or pusher axles. “Trailer tires are on a free-rolling axle with almost no torque applied, and this creates a very slow wear rate. As such, trailer tires are prone to irregular wear,” says Roger Best, sales engineering, Bridgestone Americas Tire Operations.

Yet traditionally, trailer tires get short shrift when it comes to maintenance.

“The main reason for this is that most trailer tires are not permanently matched with specific tractors,” says Brian Buckham, general manager, product marketing, Goodyear. “Trailers are often dropped to wait for unloading and re-loading. This can create an atmosphere in which drivers don't always pay enough attention to trailer tires.”

Add to that the fact that trailer tires on the inside of traditional dual assemblies are harder to access than their partner on the outside, Buckham says, and mismatched dual air pressures become likely, leading to mismatched rolling circumferences and wear conditions.

Interpreting the signs

As with pretty much anything in trucking today, keeping your trailer and tag axle tires in good shape falls primarily to your drivers. A good fleet maintenance program will include proper air pressure for the vehicles and loads they actually carry. And matching the correct air pressure to the load promotes even wear on trailer tires.

The ...Read the rest of this story

Peterbilt Returns to MATS, Predicts 15% Market Share for 2017

<img width="150" src="http://www.automotive-fleet.com/fc_images/news/m-model-579-and-567-1.jpg" border="0" alt="

More than 70% of Peterbilt's production in 2016 were Models 579 and 567.

" >

More than 70% of Peterbilt's production in 2016 were Models 579 and 567.

" width="640">

LOUISVILLE, KY -- Peterbilt Motors returned to the Mid America Trucking Show, after an absence in 2016, predicting the company could top 15% market share this year. Kyle Quinn, Paccar senior vice president and Peterbilt general manager, noted the company sold 36,000 units in 2016 for a market share in Class 8 of 13.4% -- it's fourth highest production year.

"We're taking steps to set a new market share record of 15% in 2017," he said. "We are well positioned to accomplish this, as we have achieved market share north of 16% in both of the first two months of this year."

Quinn predicts the North American Class 8 truck build for 2017 will be somewhere between 190,000 and 220,000 units, with much or that strength coming from the vocational segment.

"If you look at where we've been in the past three years, for example, the energy business has been soft, but during that period of time we raised the percentage of fleet market share, moving from 23% fleets to 38% fleets," Quinn said. "So, as the energy sector improves, we will see the return of those vocational energy bids. And that will come on top of already good performance this year and late last year on vocational orders."

Peterbilt expects its medium duty business to remain strong at 85,000 units, and Quinn noted that orders are so far keeping pace with expectations.

Overall, Quinn said he expects the industry to continue gaining strength based on solid fundamentals:

Freight tonnage is near record levels and is expected to grow by another two percent.Fourth quarter of 16 and early 17 prices are improving in the spot freight market.Over the past few months the energy sector has been gaining strength and the rig count ...Read the rest of this story

An Automated Future, First, Bendix Says

<img width="150" src="http://www.automotive-fleet.com/fc_images/blogs/m-overspeed-alert-1.jpg" border="0" alt="

Bendix says the driver remain key in increasingly automated vehicle systems for a long time to come. Photo: Bendix

">

Bendix says the driver remain key in increasingly automated vehicle systems for a long time to come. Photo: Bendix

">

Fifteen years ago, Bendix executives and engineers sat down to hash out the company's electronics strategy for foreseeable future. At the time, the focus was on the just-emerging field of electronic safety systems, based largely on Bendix's still-new anti-lock braking systems and brand-new anti-rollover technology.

"We had no idea where that path was going to lead us," company Bendix chairman and executive board member Joe McAleese says with a laugh.

I'm sitting with McAleese and Fred Andersky, who's job title names him as Bendix's director, customer solutions and government relations. But in reality, he's the company's Future Tech Wizard, playing an integral role in the development of Bendix's current vehicle technology while trying to peer into the crystal ball and figure out how the next phases of automotive tech — namely autonomous vehicles — will play out.

And the most interesting aspect of all this is that, increasingly, it's the integration of electronic vehicle systems like Bendix's Wingman active cruise/safety system that finds itself at the core of autonomous vehicle development efforts. "When we first put our electronics platform together 15 years ago,' McAleese says now, we knew we would build new functions onto them as they went forward. And we knew there would be some degree of integration. But, even so, we never envisioned anything on the scale we're seeing today."

All that said, you'd think Bendix is chomping at the bit to race forward into a bright, new, autonomous future. But the truth is Bendix is one of the more conservative technology companies today when it comes to autonomous vehicle prognostication. They decline to put an actual number on when we'll see fully-autonomous, Level 5 cars and trucks in everyday use. But both of ...Read the rest of this story

Peterbilt Sets Dealer Growth Record, Completes Denton Plant Expansion

LOUISVILLE, KY -- Peterbilt has added a record number of 93 new dealers to its network over the past four years. In addition, many existing locations have been expanded or upgraded, vastly enhancing the responsiveness and coverage of the network, Peterbilt said at the press conference here at the Mid-America Trucking Show.

“Peterbilt has greatly increased our footprint in the industry to the benefit of our customers,” says Robert Woodall, Peterbilt assistant general manager of Sales and Marketing. “The network expansion results in higher levels of service and enhanced parts availability, which translates into increased uptime and greater profitability for Peterbilt customers.”

The dealer groups are committed to growing their footprint to support customers and to deliver the highest levels of service and support.

“New capabilities and expanded service bay count will also contribute to enhanced customer satisfaction," noted Peyton Harrell, Peterbilt director of dealer network development. "All Peterbilt dealerships throughout the U.S. and Canada are now certified in the Rapid Check program, which guarantees fast and accurate service diagnostics.”

To keep product flowing smoothly to those new dealer locations, the company has just completed a major expansion of its Denton, Texas manufacturing facility.

“The expansion investment is the largest made by Peterbilt since the plant construction,” said Leon Handt, assistant general manager of operations at Peterbilt. “We're committed to manufacturing the industry's highest quality vehicles. Growing the Denton plant's footprint allows us to increase our manufacturing efficiency and positions us for future growth.”

The final expansion phase concluded in January with the opening of a new 102,000 square-foot Test Building. All testing and validation have been relocated to the new test building, which allows a more efficient process flow.

The building features a new dynamometer capable of handling all truck configurations, as well as two new paint booths. Total test capacity has been increased by 75 ...Read the rest of this story