Weigh Station Bypass Saves Time for Car Hauler

Weigh Station Bypass Saves Time for Car Hauler

<img width="150" src="http://www.automotive-fleet.com/fc_images/articles/m-moore-transport-1.jpg" border="0" alt="

Moore Transport has been successful recruiting drivers for its fast-growing fleet, but long waits at weigh stations were taking a toll on driver satisfaction. Photos: Courtesy Drivewyze

">

Moore Transport has been successful recruiting drivers for its fast-growing fleet, but long waits at weigh stations were taking a toll on driver satisfaction. Photos: Courtesy Drivewyze

">

One of the biggest challenges for Ohio-based Moore Transport, a fast-growing auto carrier, is getting experienced drivers. Its emphasis on a safety mindset and running late-model equipment of the type more favored by independent owner-operators means they're able to attract a lot of drivers by word of mouth. But wasted time pulling into weigh stations multiple times a day was wearing on driver satisfaction.

Treasure Phillippi, safety supervisor, says the company knew it had to address the problem when she learned in 2015 that exit surveys found one out of every five drivers who left did it because the company was not making good on its promises of free weekends.

“Because some of our lanes are local lanes, drivers go through the same scales two and three times a day,” Phillipi explains. “We would go through at peak hours and have to get in line and go through the scales. For the most part, we have pretty good CSA scores, so we weren't getting pulled in a lot, but it was just the slowing down, the creeping through the scales — drivers were losing 20, 25 minutes each time they went through a scale. They would tell me, ‘I don't have time to reload because I spent two hours crossing scales.'”

The company researched traditional transponder-based weigh station bypass systems but eventually chose to use Drivewyze PreClear, a bypass system that works on a mobile device or telematics system.

“I took 15 or 20 trucks and had them download the Drivewyze app after some drivers said they had been using it and paying for it out of their own pocket,” she says. “After a month or so, some were ...Read the rest of this story

Bison’s Rob Penner named incoming chairman of TCA

NASHVILLE, TN – Rob Penner, president and CEO, Rob Penner, has been named Chairman of the Truckload Carrier Association (TCA) for the 2017-2018 term. Penner, the second Canadian to ever hold a chairman position with the TCA, took the stage today at the TCA annual convention in Nashville, Tennessee, to address the crowd at the convention and began by cracking a joke that he'd be the first chairman in a long time without an accent. “It is truly a privilege to serve you all as the chairman of the TCA,” said Penner. “Eight or nine years ago I got a call from TCA past chairman, Kevin Birch, to see if I had any interest in becoming an officer here. This asscoation and the opportunity to get involved and to know many of you has provided tremendous value to me personally as well as to our company Bison Transport.” ...Read the rest of this story

Bison’s Rob Penner named TCA chairman

NASHVILLE, TN – Rob Penner, president and CEO, Rob Penner, has been named Chairman of the Truckload Carrier Association (TCA) for the 2017-2018 term. Penner, the second Canadian to ever hold a chairman position with the TCA, took the stage today at the TCA annual convention in Nashville, Tennessee, to address the crowd at the convention and began by cracking a joke that he'd be the first chairman in a long time without an accent. “It is truly a privilege to serve you all as the chairman of the TCA,” said Penner. “Eight or nine years ago I got a call from TCA past chairman, Kevin Birch, to see if I had any interest in becoming an officer here. This asscoation and the opportunity to get involved and to know many of you has provided tremendous value to me personally as well as to our company Bison Transport.” ...Read the rest of this story

Used Truck Sales See Bump Compared to 2016

Used Class 8 truck sales volumes in February were higher overall than in 2016 and they improved for a second consecutive month, according to an ACT Research Report.

All three used truck market segments posted gains in the month, covering sales from auction, retail, and wholsesale. The numbers were released as part of ACT Research's latest report, State of the Industry: U.S. Classes 3-8 Used Trucks.

“Total volumes were also higher year-over-year compared to February 2016, and year-to-date relative to the same time period last year,” said Steve Tam, ACT vice president.

The average price of used Class 8 trucks fell from January to February and are also down year-over-year and year-to-date compared to the same period last year.

“We expect pricing to remain at or near current levels throughout 2017,” said Tam.

Related: Optimism Spurs Increased Heavy-Duty Truck Sales Predictions

Follow @HDTrucking on Twitter

...Read the rest of this story

Talbert Introduces 55-Ton Extendable Heavy Haul Trailer

Talbert Manufacturing has introduced a new 55-ton extendable heavy-haul trailer, the 55SA-Tele, designed to haul large equipment.

The 53-foot unit allows users to haul a wide range of large equipment, such as bridge beams, conveyors, generators, pressure vessels and tanks, then retract he trailer to 32 feet, 6 inches. This shortens the overall trailer length to 53 feet, eliminating the need for permits.

Talbert designed the 55SA-Tele with a 90-inch swing radius that can be extended to 114 inches with the use of a gooseneck extension. This gets the most out of its deck length while keeping it within the legal 53-foot limit when retracted.

The trailer can be set up as a four-axle close coupled, 2+2 spread axle, or 3+1 spread axle configuration. The third and fourth axles can be flipped or removed, plus a 24-inch pinned and hinged gooseneck can also be flipped. This, along with its 24-inch flip-up extension, shortens the deck to 32 feet, 6 inches.

The unit features a 29-foot wood deck in the front and a 3-foot Apitong platform in the rear with beams stretching between. The trailer expands and locks in 4-foot increments.

The 55SA-Tele also is equipped with Talbert's ENitro nitrogen-assisted dampening system. ENitro provides a safe and stable platform that nearly eliminates bridging of the spreader, which can occur if an entire load rides on the rearmost axle. The system's nitrogen accumulator oscillates around a central self-tracking pivot point to provide proportional weight distribution in each axle grouping. It sets the axle load capacity and keeps it there as the system equalizes up and down articulation.

The trailer also features a low deck height of 20 inches which optimizes headspace for taller equipment. The trailer has an air ride suspension and can be equipped with optional Dura-Bright aluminum wheels, strobe lights at each axle, ...Read the rest of this story

Bison Transport’s Penner to Head Truckload Carriers Association

<img width="150" src="http://www.automotive-fleet.com/fc_images/news/m-bob-penner-2.jpg" border="0" alt="

Rob Penner Photo: Deborah Lockridge

">

Rob Penner Photo: Deborah Lockridge

">

The Truckload Carriers Association has named Bison Transport President and CEO Rob Penner as the group's 2017-18 chairman. TCA made the announcement at its annual convention, being held this week in Nashville, Tenn.

Penner has been involved with TCA in several capacities. He chaired the Regulatory Policy Committee in 2010 and is a past member of the Highway Policy committee, the Benchmarking Best Practices Group, and the Financial Oversight & Long-Range Planning Task Force. A member of the executive committee and board of directors of TCA, he has also held the positions of treasurer, at-large officer, and first vice chair.

Penner will lead TCA until the next annual convention in March 2018. During his acceptance speech, Penner announced the formation of a strategic task force that will research issues affecting productivity, profitability, and the movement of freight across North America. The findings will be turned into a position paper that can be used to provide background and rationale to inform the development and adoption of TCA policies.

“Today, it appears we are trapped spending the majority of our face time with lawmakers and regulators talking about what we don't want… What we need is for them to give us time to talk about what we stand for, not what we stand against,” said Penner. “We want a seat at the table, and the only way we get that is if we are viewed as a thoughtful partner, capable of presenting meaningful, viable and sustainable solutions to complex problems and that we back our position with truth and fact. Our new horizon may not be one we are familiar with, but it is one we can shape.”

Penner began his career in the transportation industry in 1984 as a truck driver and joined Winnipeg, Manitoba-based Bison Transport in 1991. He ...Read the rest of this story