California Strikes Deal with Truckers to Hike Fuel Tax

California Strikes Deal with Truckers to Hike Fuel Tax

<img width="150" src="http://www.automotive-fleet.com/fc_images/news/m-congestion-2-3.jpg" border="0" alt="

Congestion in California. Photo: U.S. Dept. of Transportation

">

Congestion in California. Photo: U.S. Dept. of Transportation

">

A bill to raise fuel taxes that could bring in $5.2 billion a year has advanced through the California legislature and needs only to be signed by Gov. Jerry Brown (D) before going into effect.

The base excise tax will jump 12 cents per gallon for regular gasoline and 20 cents per gallon for diesel fuel. In addition, the sales tax on diesel fuel will increase by four percentage points, according to the Los Angeles Times. The money will be used to support California's aging transportation infrastructure.

To pass the bill, the governor tried to garner support from the trucking industry because the diesel tax will mostly impact transportation companies. The diesel tax alone will generate at least $10 billion in revenue over the next ten years.

Gov. Brown was able to strike a deal with lawmakers that will restrict the state from requiring owners to retire or retrofit trucks to meet new greenhouse gas regulations before they're 13 years old or reach 800,000 miles. Truck owners could keep vehicles as long as 18 years in some cases, according to the U.S. News and World Report.

That move that was predictably unpopular with environmental groups, which contend the provision will delay the impact of clean air regulations and harm California residents, particularly around busy ports and in areas with heavy truck traffic.

The bill also includes an increase in license and registration fees based on the value of the vehicle. The taxes and fees will increase over time with inflation.

The fuel tax hikes will take effect on Nov. 1 and the vehicle fee increases will start on Jan. 1, 2018.

The bill was contentious, with Republican lawmakers arguing against the increase in a state that already pays the highest fuel prices in the nation.

This ...Read the rest of this story

Economic Watch: Trucking Helps Push Unemployment to Near 10-Year Low

While the number of jobs added in the U.S. slowed dramatically during March, trucking supplied a big part of the gain, according to Labor Department figures released Friday, helping push the unemployment rate almost down to a 10-year low.

Overall, 98,000 jobs non-farm jobs were added during the month, less than expected from a consensus estimate from analysts and far below February's revised addition of 219,000.

March employment growth occurred in professional and business services, with 56,000 job additions, as well as in mining with 11,000 job gains. Retail trade lost 30,000 jobs as many large chain stores are closing locations.

Trucking added 4,700 jobs during March. The wider transportation and warehousing sector saw a smaller gain of 3,500, due to a decline in the courier and messengers and transit and ground passenger transportation categories.

Even with these small changes, the unemployment rate fell 0.2 of a percentage point to 4.5%, the lowest rate since May 2007. The decline was driven entirely by more workers finding employment while the participation rate held steady, according to Wells Fargo Securities.

The report also showed average hourly earnings during March for all employees on private nonfarm payrolls increased by 5 cents to $26.14, following a 7-cent increase in February. Over the year, average hourly earnings have risen by 68 cents, or 2.7%, the same annual rate as inflation, according to February figures released last month.

The report may be more indicative of U.S. labor markets approaching capacity limits rather than a sign of weakening in labor demand, according to Paul Ferley, assistant chief economist at RBC Economic Research.

“Indications of tightening labor markets were clearly conveyed by the unemployment rate unexpectedly dropping [while] wage growth continues to trend higher,” he said. “Though job growth may be moving towards a more moderate pace, higher wages should keep incomes rising to sustain ...Read the rest of this story

KW’s New T880S Has Traditional Looks, Surprising Maneuverability

<img width="150" src="http://www.automotive-fleet.com/fc_images/articles/m-img-2733-1.jpg" border="0" alt="

Forward-set steer axle on the T880S mixer and dumper add legal payload in bridge-formula states. But the flat-faced styling also appeals to some non-vocational customers, KW is finding. Photos: Tom Berg

">

Forward-set steer axle on the T880S mixer and dumper add legal payload in bridge-formula states. But the flat-faced styling also appeals to some non-vocational customers, KW is finding. Photos: Tom Berg

">

A forward-set steer axle is usually a means of stretching a truck's wheelbase to meet weight-distribution laws in so-called bridge states, and that's the reason for Kenworth's new vocational T880S. But its brawny, flat-faced styling for has sparked interest from users who simply like its looks, said builder officials during a ride-and-drive event April 6 at Kenworth's plant in Chillicothe, Ohio.

And driving on roads near the plant showed a surprisingly tight turning radius, especially with wide-base wheels and tires on the demonstration trucks. These were a five-axle concrete mixer and a four-axle dump, the prime applications for the T880S, which will replace the vocational W900S in KW's product lineup.

The sharp turnability was immediately evident on the first turn I took in the mixer, which soon verified that 90-degree corners were no problem. Past KW's with a forward-placed steer axle that I've observed and driven were somewhat ungainly in tight turns, whether traveling forward or while backing. So the good maneuverability was a welcome change.

One reason it performs well in corners is an offset in the front wheels, which puts tires further from the frame and steering gear and allows a tighter wheel cut, said product planners led by Curt Swihart, chief marketing officer at KW. The steering gear is still outside the frame rails, which can be expected to block a tight cut, but not here.

Both trucks had powerful engines and accelerated well. The mixer had a 430-hp Paccar MX-11 driving through a 7-speed Allison 4700 automatic, while the dumper had a 510-hp MX-13 running through an 18-speed Eaton UltraShift Plus. The self-shifting transmissions made both trucks easy to drive and ...Read the rest of this story

And just like that, platooning is here

Fleet Owner gets more detail from Omnitracs, Peloton on new truck platooning system How's it work? This will be on real roads next month, or is already? Yes, two-truck platooning as a commercially available system could be coming to fleets on a highway near you very soon via the joint product that Omnitracs and Peloton Technology announced recently. Fleet Owner got more detail from the two companies, including how the system works, what equipment it involves, states' varying readiness for platooning and more.

read more

...Read the rest of this story