MacroPoint integrates with JDA Software’s TMS

TMC: Aerodynamic Wheel Covers Work if You Cover Your Bases

<img width="150" src="http://www.automotive-fleet.com/fc_images/articles/m-realwheels-wheelcovers2-1.jpg" border="0" alt="

Photo: RealWheels

">

Photo: RealWheels

">

Many equipment users are seriously considering the use of aerodynamic wheel covers to improve the fuel economy of their commercial vehicles. While fleets in over-the-road, linehaul operations may realize fuel economy improvements thanks to aerodynamic wheel covers, they may also suffer negative impacts from these devices in other areas of their operations.

So last year, the Technology & Maintenance Council of the American Trucking Associations set out to identify the potential promise and pitfalls associated with using aerodynamic wheel covers. The work fell to TMC's S.2 Tire and Wheel Study Group and its Aerodynamic Wheel Cover Task Force, led by Dave Walters with Alcoa Wheels. The resulting TMC Recommended Practice, RP 261(T), Considerations for Aerodynamic Wheel Covers, was preliminarily approved at TMC's 2017 Annual Meeting in Nashville, Tennessee, in February.

The Task Force found that fleet evaluation of aerodynamic wheel covers should include unintended negative consequences on operational and maintenance, since the potential fuel savings could be offset by unexpected increases in maintenance and operational costs.

Vehicle inspections are an important first consideration when evaluating aerodynamic wheel cover use. Will a driver or technician be able to properly inspect the vehicle's wheel ends with aerodynamic wheel covers installed?

Some wheel covers are clear/transparent and thus allow personnel to see through them for axle-end inspection. However, such designs may not remain clear or transparent after being placed into service. Wheel covers may also inhibit a technician's ability to clean the wheel surfaces of corrosive material.

Another consideration is the impact aerodynamic wheel covers may have on tire and wheel maintenance. If the aerodynamic wheel cover hides the wheel hand-hols and prevents access to tire valve stems, it must be removed before checking and adjusting tire inflation. If the covers must be removed, they should be able to be removed and reinstalled easily and quickly. Their ...Read the rest of this story

Economic Watch: Weaker Numbers for Manufacturing, Housing

A measure of industrial production in the U.S. moved higher despite an easing in manufacturing, while the housing market also gave up some recent gains, according to reports issued Tuesday. Both reports follow recent moderate to impressive gains.

The total output from the nation's factories, mines and utilities moved 0.5% higher in March after moving up 0.1% in February, according to the Federal Reserve. The performance was in line with Wall Street expectations.

The increase in March was more than accounted for by a jump of 8.6% in the output of utilities, the largest in the history of the index, as the demand for heating returned to seasonal norms after being suppressed by unusually warm weather in February. The production at mines edged up 0.1%.

Manufacturing output, which more directly affects truck freight, fell 0.4% in March, led by a large step-down in the production of motor vehicles and parts. Factory output aside from motor vehicles and parts slipped 0.2%. Despite the decline, manufacturing output in March was up 0.8% from the same time in 2016.

The March drop in factory output followed gains in January and February that are now reported to be smaller than stated earlier. The decline in the manufacturing index in March was its first loss since August 2016, however, factory output increased at an annual rate of 2.7% in the first quarter.

For the first quarter as a whole, industrial production rose at an annual rate of 1.5%.

At 104.1% of its 2012 average, total industrial production in March was 1.5% above its year-earlier level.

“A weather-related surge in utility output masks what is otherwise a weak industrial production report for March,” said analysts at Econoday. “Manufacturing… [which] represents the vast core of this report… points to a quarter-end fizzle for a factory sector where unusually strong readings in sentiment reports have ...Read the rest of this story

Trailer orders down for March but expected to keep growing

Orders for vocational trailers, however, showed “some signs of life” last month after an extended slump.

While net trailer orders slipped in March compared to previous months, they are up 45% to 50% year-over-year to total 246,000 units for the last twelve months – a trend Don Ake, vice president of commercial vehicles at research firm FTR Transportation Intelligence, described as a “great sign” moving into the seasonally strong second quarter.

read more

...Read the rest of this story