SAF-Holland FW17 Fifth Wheel Made Standard on International RH

SAF-Holland FW17 Fifth Wheel Made Standard on International RH

The Holland FW17 Series Fifth Wheel will be standard equipment on Navistar's new International RH Series regional-haul tractor, SAF-Holland has announced.

The FW17 has a 50,000-pound maximum vertical load and a 150,000-pound maximum drawbar pull capacity. Designed as an economical solution for weight conscious on-highway fleets, the thin-walled cast steel top plate offers a mix of durability and low weight.

“We are honored once again that Navistar selected the Holland FW17 as its standard fifth wheel on the International RH Series tractor,'” said Jeff Talaga, vice president of sales and strategic development, Americas. “This new standard position represents the importance of our continued partnership with Navistar.”

The FW17's locking system design features a greater kingpin contact area compared to competitive models that can extend kingpin and lock life, according to SAF-Holland. Its release mechanism includes a lever arm design that minimizes the pull effort required in addition to protecting the handle from damage during a missed couple. The lock adjustment system was designed to be user-friendly and make the lock adjustment process simple and accessible. All FW17 models come standard with No Lube articulation pocket liners.

An optional air release feature allows in-cab air release of the fifth wheel locking mechanism. The FW17 is backed by a 5-Year/500,000-mile Performance Guarantee.

Related: International Reveals RH Regional Tractor, Designed with Driver Input

Follow @HDTrucking on Twitter

...Read the rest of this story

Downspeeding Comes of Age

<img width="150" src="http://www.automotive-fleet.com/fc_images/articles/m-smartadvantage-powertrain-1.jpg" border="0" alt="

The game-changer in the development of downsped drivetrains was the automated manual transmission, which offered new opportunities for fine-tuning and controlling powertrains at cruise speeds. Photo: Cummins

">

The game-changer in the development of downsped drivetrains was the automated manual transmission, which offered new opportunities for fine-tuning and controlling powertrains at cruise speeds. Photo: Cummins

">

Low and slow” may be a bad thing in aviation, but in linehaul trucking, it appears to be the operating mode of the future.

First, a quick review: Downspeeding is not a new concept. The basic idea has been around as long as the internal combustion engine: Reduce overall engine revolutions at highway cruise speeds to increase fuel economy. It's just common sense, after all. A slower-turning engine burns less fuel. The basic problem working against downspeeding was equally simple: A slower-turning engine also meant a slower-running truck.

A drivetrain optimized for lower rpm at highway speeds didn't develop the large amounts of low-end torque required to get fully loaded tractor-trailers up and moving in an efficient – and timely – manner. What was needed was some way of limiting engine torque at low speeds. Ideally, such a system would be combined with robust, yet lightweight driveshafts, U-joints and axles.

The game-changer was the automated manual transmission, which offered new opportunities for fine-tuning and controlling powertrains at cruise speeds. With this foundational piece of technology in place, work began on developing lighter-weight driveshafts and lower-ratio rear axles to better handle the increased strain inflicted on them at vehicle launch.

The first production downsped drivetrains cruised with 1,150 rpm showing on the tachometer with 900 rpm and even 700 rpm suggested as targets for the near future. That's a clear sign there's a real drive to go slower, said Mike Roeth, principle of the North American Council for Freight Efficiency, a nonprofit group that works to validate current and emerging fuel-economy technology for fleets, in a session at the American Trucking Associations' Technology & Maintenance Council annual meeting recently.

Roeth ...Read the rest of this story

Road to driverless trucks clogged with unanswered questions

Driver training, safety, and cybersecurity among the topics discussed during FMCSA listening session.

With nearly daily media reports detailing new breakthroughs of highly automated commercial vehicles (HACVs), it may seem they are almost ready for large-scale use.

Yet a public listening session sponsored by the Federal Motor Carrier Safety Administration (FMCSA) illustrated just how many questions remain to be answered before the technology can become a reality on the nation's highways.

read more

...Read the rest of this story