IN PRINT — The Downspeeding Decision: Can it work with Canadian spec's?

IN PRINT — The Downspeeding Decision: Can it work with Canadian spec's?

Spec'ing powertrains for Canadian operations is a tricky job. Americans take their powertrain spec's pretty seriously as well, but how tough is it to get something that will move 80,000-pound loads on interstate highways? To be fair, our southern neighbors are always pushing the proverbial envelope, but tricky takes on a whole new meaning when it comes to downspeeding. ...Read the rest of this story

Q. What will happen during a roadside inspection when I have an ELD instead of a paper log?

A. Drivers are not the only ones who will have to adjust to ELDs. Law enforcement officials will need to be trained as well. Given the variety of automated onboard recording devices (AOBRDs) and electronic logging devices (ELDs), along with the different software platforms, there may be some confusion at the time of a roadside inspection.

Fleets would be wise to make sure all their drivers are well educated about the information they need to provide during an inspection. Make sure your drivers can identify which hours of service (HOS) recording method they are using and make sure they understand which data displays are appropriate for each HOS recording method.

As of December 18, 2017, ELDs must support one of two options for electronic data transfer, according to the ELD rule:

1. The first option is a “telematics” transfer type ELD. At a minimum, it must electronically transfer data to an authorized safety official on demand via wireless web services and e-mail.

2. The second option is a “local” transfer type ELD. At a minimum, it must electronically transfer data to an authorized safety official on demand via USB2.0 and Bluetooth.

Drivers must be able to transfer data for the last seven days and the current day.

To ensure that law enforcement is always able to receive the hours of service data during a roadside inspection, a driver must be able to provide either the display or a printout when an authorized safety official requests a physical display of the information. However, it's unknown when or how many enforcement officials will be using the electronic transfer functions, especially at first. It is the driver's responsibility to display the log, and if the driver fails to do so, the officer will write the driver up for not having the log or not being trained on how to ...Read the rest of this story

Q. What does a driver need to do if his/her ELD malfunctions?

A. The Federal Motor Carrier Safety Administration (FMCSA) offers clear directions on what needs to be done in case an electronic logging device (ELD) malfunctions. First, the driver must note the fact that the ELD malfunctioned and provide written notice of the malfunction to the fleet within 24 hours.

Next, the driver has to reconstruct the record of duty status (RODS) for the current 24-hour period as well as for the previous seven consecutive days. The RODS must be plotted on graph-grid paper logs that comply with 49 CFR 395.8, unless the driver already had the records or can retrieve them from the ELD.

The driver then must continue to prepare RODS in accordance with 49 CFR 395.8, until the ELD has been fixed and is back in service and compliant.

The motor carrier has eight days from learning about the malfunction to correct, repair, or replace the malfunctioning ELD.

There are a variety of ways an ELD can malfunction:

Power compliance malfunctionsEngine synchronization data compliance malfunctionsTiming compliance malfunctionsPositioning compliance malfunctionsData recording compliance malfunctionsData transfer malfunctions

Follow @HDTrucking on Twitter

...Read the rest of this story

Q. I have an AOBRD, why do I need an ELD?

A. Technically you do not need to switch your automatic onboard recording device (AOBRD) to an electronic logging device (ELD) until December 16, 2019. According to the Federal Motor Carrier Safety Administration (FMCSA), trucks equipped with AOBRDs that meet the requirements of CFR 395.15 have two additional years to meet the ELD rule.

While you are given two additional years, you may want to consider beginning to make the switch from AOBRDs to ELDs gradually between now and the December 2019 deadline.

How to Start:

Create a plan for transitioning from AOBRDs to ELDs.Inform your drivers of the plan and consider involving some of them in the device selection process.

There are a variety of ELD models to choose from and it is a good idea to start the evaluation process early to find the ELD that is best suited for your business. Develop a list of questions and criteria: https://www.geotab.com/blog/switching-eld-providers/ to help you selected an ELD supplier. This will allow you to compare the various options available to you.

In addition, you want to make sure you allow enough time for implementation. It will take some time to install the new devices properly. Transitioning slowly eliminates a surge of installation work in the days immediately prior to the deadline.

Then you will need to train your drivers so they fully understand how the ELD operates. With AOBRDs, drivers only have to show enforcement officials the device's display. They do not have to transfer data. ELDs require them to be able to transfer data and they will need training in the proper way to do that.

Once the devices are installed and drivers are trained on proper usage (https://www.geotab.com/blog/eld-rollout/), take time to test them to ensure they are operating properly and to resolve any problems before you implement in the field.

Follow @HDTrucking on ...Read the rest of this story