Downspeeding Comes of Age
The game-changer in the development of downsped drivetrains was the automated manual transmission, which offered new opportunities for fine-tuning and controlling powertrains at cruise speeds. Photo: Cummins
“>
The game-changer in the development of downsped drivetrains was the automated manual transmission, which offered new opportunities for fine-tuning and controlling powertrains at cruise speeds. Photo: Cummins
“>
Low and slow” may be a bad thing in aviation, but in linehaul trucking, it appears to be the operating mode of the future.
First, a quick review: Downspeeding is not a new concept. The basic idea has been around as long as the internal combustion engine: Reduce overall engine revolutions at highway cruise speeds to increase fuel economy. It’s just common sense, after all. A slower-turning engine burns less fuel. The basic problem working against downspeeding was equally simple: A slower-turning engine also meant a slower-running truck.
A drivetrain optimized for lower rpm at highway speeds didn’t develop the large amounts of low-end torque required to get fully loaded tractor-trailers up and moving in an efficient – and timely – manner. What was needed was some way of limiting engine torque at low speeds. Ideally, such a system would be combined with robust, yet lightweight driveshafts, U-joints and axles.
The game-changer was the automated manual transmission, which offered new opportunities for fine-tuning and controlling powertrains at cruise speeds. With this foundational piece of technology in place, work began on developing lighter-weight driveshafts and lower-ratio rear axles to better handle the increased strain inflicted on them at vehicle launch.
The first production downsped drivetrains cruised with 1,150 rpm showing on the tachometer with 900 rpm and even 700 rpm suggested as targets for the near future. That’s a clear sign there’s a real drive to go slower, said Mike Roeth, principle of the North American Council for Freight Efficiency, a nonprofit group that works to validate current and emerging fuel-economy technology for fleets, in a session at the American Trucking Associations’ Technology & Maintenance Council annual meeting recently.
Roeth …Read the rest of this story
Source:: http://www.truckinginfo.com/channel/fuel-smarts/article/story/2017/04/downspeeding-comes-of-age.aspx